Each command subsystem is a set of commands that roughly correspond to a functional block inside the instrument. For example, the :IO subsystem contains commands for controlling the …

The Standard Commands for Programmable Instruments (SCPI; often pronounced "skippy") defines a standard for syntax and commands to use in controlling programmable test and …

It contains general explanation, conventions used and all the SCPI commands supported by the instrument. It also describes whether a command is available as a set command or a query …

Feb 11, 2024 · SCPI stands for “Standard Commands for Programmable Instruments”, which are straightforward string commands that one computer can send to an instrument to read or write …

*SRE - Service Request Enable Before reading a status register, bits must be enabled. This command enables bits in the service request register. The current setting is saved in non …

Learn how to send commands with SCPI and get tips and tricks on what to remember and what to avoid.

Standard Commands for Programmable Instruments, or SCPI commands, are an ASCII-based set of pre-defined commands and responses. They use the same data format across all SCPI …

The Standard Commands for Programmable Instrumentation (SCPI; often pronounced "skippy"), define syntax and structure rules to use and create commands for programmable …

Interface control, ECal module state control, and Rear-panel connector control. Work with a Cal Set without having to select it into that channel. Controls internal switch to reference receiver. …

Some common commands are defined in the IEEE-488.2 standard and must be implemented by all SCPI compatible instruments. These commands are identified by the asterisk (*) at the …